If you’re a motorcyclist in New Zealand who wants more power, smoother throttle response, or better fuel efficiency, dyno tuning is the best way to unlock your bike’s full potential. At Motorcycle Doctors in Auckland, we specialise in precision dyno tuning using the latest equipment to get your bike running at its absolute best.
Dyno tuning is the process of running your motorcycle on a dynamometer (dyno machine) that measures horsepower, torque, and air/fuel ratios under load. Using this data, we fine-tune your bike’s ECU (engine control unit) or fuel system to deliver maximum performance, efficiency, and rideability.
Think of it as a health check and performance upgrade combined — your bike is tested in real riding conditions, and the tune is customised to your setup.
Increased Power & Torque – Unlock hidden horsepower from your engine.
Improved Fuel Economy – A properly tuned bike uses fuel more efficiently.
Smoother Throttle Response – No more flat spots or hesitation.
Customised to Your Bike – Every tune is tailored to your exhaust, air filter, and riding style.
Better Reliability – Correct air/fuel ratios protect your engine from running too lean or too rich.
At Motorcycle Doctors Auckland, dyno tuning typically ranges from:
$600 – $900 for standard tuning (depending on bike model and ECU access).
$1,000 – $1,200+ for advanced custom mapping or heavily modified bikes.
👉 Every bike is different, so costs vary depending on the setup, modifications, and time required on the dyno.
Initial Inspection – We check your bike for faults, leaks, or issues.
Baseline Run – Measure your current horsepower, torque, and air/fuel ratios.
ECU Remap or Fuel Adjustments – Using software like Woolich Racing or Power Vision, we fine-tune your bike’s fuel, ignition, and throttle.
Multiple Test Runs – Adjust and re-test until performance is optimised.
Final Report – You get a printout of your before/after dyno results.
Does dyno tuning void my warranty?
In most cases, no. But always check with your dealer. ECU remapping may affect manufacturer warranties, while piggyback systems like Power Commander are often removable.
How long does dyno tuning take?
Most bikes take 3–5 hours depending on complexity.
What do I need to prepare before dyno tuning?
Fresh oil, clean air filter, good tyres, and full fuel tank.
Over 15 years’ experience tuning motorcycles.
State-of-the-art dyno machine for precise results.
NZQA-certified mechanics you can trust.
Friendly service and clear explanations.
📍 Based in Wairau Valley, Auckland – proudly servicing Kiwi bikers since 2008.
Book your motorcycle dyno tuning in Auckland today with Motorcycle Doctors.
